• A system for sending and receiving data through the network via an Ethernet channel RJ-45

• Support 3 channels of closed circuit Dry Contact input and 3 channels of Dry Contact output.

• Able to set conditions of input signal such as the output of other alarm devices and notify via E-mail, Line, which can set the message to be sent in each condition

• Able to set cumulative hours of each input for notification e.g. alarm for maintenance of equipment connected to the input of the control and alarm device.

• Able to set the time to receive the continuous value of each Input to alert the device that is connected to the Input of the control and alarm device, such as alerting when the door is opened or the cabinet is opened beyond the specified time

• Able to alert in case of power failure by connecting to the input signal of the device.

• Able to command Output to work according to input conditions.

• Output can be commanded to operate from software controlled by the operator, such as opening the door, turning on the light, turning on the siren, and opening the cabinet by the device must be connected to the output of the control and alarm device.

• Able to receive temperature value from temperature sensor and alert when temperature exceeds set value and can also set the temperature range to turn on/off the output channel. For example, when the temperature reaches a certain point, the signal channel will be on and off when the temperature drops to a set point.

• Output can be connected to a rated fan to monitor fan rotation.

• Can view images from CCTV IP Camera via RTSP protocol

• Can simulate the location and status of the control and alarm device on Map Image and show the actual location in Google Map. Show the color of the notification.

• Log input of the control and alarms devices can be saved in the database to display as a report.

• Input data from the control device can be reported as a summa report of daily or specific period of time.

• Able to select the desired input data to report, displaying in graph format which can be selected bar, line, and pie graph